Instructions of BLUBOO S1 Flashing

community Forums Service Center Instructions of BLUBOO S1 Flashing

This topic contains 0 replies, has 1 voice, and was last updated by  BLUBOO ADMIN 2 weeks, 3 days ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #19132

    BLUBOO ADMIN
    Keymaster

    WARNING! The installation process will remove all the data from your device. Please, if you have an important data on your device, backup your files. To avoid complications and software instability during OTA update and update via PC, please, take out a memory card from your device.

    Download link:
    Driver

    Flash tool

    The latest ROM

    NOTE: The ROM in this article is not for BLUBOO S1 with build number version as below, so please do not download the ROM here if your BLUBOO S1 has the build number as shown below.

    BLUBOO_S1_Helio_P25_V10_20170818

    BLUBOO_S1_Helio_P25_V06_20170728

    Step1. Download and unzip all the files.
    picture 1

    Step2. Driver installation.

    Open file “Driver_Auto_Installer_EXE_v5.1632.00”, find document “DriverInstall” and run it.

    picture 2

    click any key to finish the installation when the screen show as below

    Step3. Open the flash tool and choose the scatter file

    open file “MDT_1736.01_AfterSale”

    find and run “SPMultiPortFlashDownloadProject”

    click on “Scatter file” button, choose the file “MT6757_Android_scatter”

    Step4. Scan port.

    click on “scan” button, turn off your phone and connect it to the computer, press the “volume -” button when the flash tool is scanning port.

    Step5. Update to the latest ROM.

    pull out your phone, click on “Start all” button

    reconnect your phone to the computer, wait till success

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.